Parts List: Straight Housing Option; Installation: Straight Housing Option - Whale Twist DS0003B Handbuch

CAUTION: Ideally, the showering temperature should be set at 38 ºC (100 ºF) for
health and safety reasons, higher settings will increase the risk of scald injury. Those at
greatest risk of scald injury include children, the elderly, disabled, and diabetics.
WARNING: The Whale Twist® Deck Shower is not suitable for domestic applications.
8. PARTS LIST - STRAIGHT HOUSING OPTIONS
MIXER VERSION
1 Handset and hose with p clamp (screw incl.)
1 Straight housing
1 Locking nut
1 Valve housing with temporary shut off valve
2 WX1532B - adaptor 1/2" BSP female
COLD ONLY VERSION
1 Handset and hose with p clamp (screw incl.)
1 Straight housing
1 Locking nut
1 WX1532B - adaptor 1/2" BSP female
9. INSTALLATION - STRAIGHT HOUSING OPTIONS
STEP 1 Choose a suitable location for the
Please note: Before installing, ensure that
suffi cient space is allowed for the shower hose
when stowed. Also ensure that it is free from
obstructions when pulled out.
STEP 2. Allowing for the height and width restrictions indicated in Fig. 2, drill one
Downloaded from www.Manualslib.com
attached (includes 2 retaining screws)
(supplied with retail models only)
shower to be installed. The unique
design allows the shower to be fi tted
on a fl at or curved surface, on a
horizontal or angled plane. Ensure
there is suffi cient space to allow space
for the handset and hose when stowed.
(See Fig. 2). Ensure that the plumbing
connections and p clamp are mounted
as close as possible to the handset
housing to ensure maximum usable
hose length.
50mm (2") diameter circular hole in the bulkhead above the water line. (See
Fig. 3) Please note: minimum mounting surface thickness: 3mm (1/8");
maximum mounting surface thickness 19mm (3/4").
manuals search engine
Fig. 1
TM
Deck Protect
End cap
Handset
Hose
Fig. 2
Please allow a
minimum width of
250 mm (10") for
hose stowage-
using
P Clamp
Straight
Housing
Valve
Housing
4