System Monitoring - Teleco phoneBoostervan Bedienungsanleitung

EN
7.2

System monitoring

After registration select "+" simbol, see Figure 6.
Figure 6.
Select "Next", Figure 7, and in the list of the devices select your PhoneBoosterVan. After this selection we
must select the configuration type. with or without wifi connection, and after this we can input location
other informations about out Booster. In the next menu if we select our PhoneBoosterVan, we can see the
status of every single band and state (Gain, Output Level, Isolation, etc), Figure 7.
pag. 82