Herunterladen Inhalt Inhalt Diese Seite drucken

General Information; Safety Warning; Presentation - Teleco phoneBoostervan Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

1 General information

This user manual describes design, installation, commissioning and maintenance of the mobile phone
booster PhoneBoosterVan. Please, read user manual carefully before installing and maintening the
PhoneBoosterVan. The information in this manuali s subject to change without prior notice.

2 Safety Warning

3 Presentation

PhoneBoosterVan is designed to received and improve the mobile phone signal received from 800MHz –
900MHz – 1800MHz – 2100MHz – 2600MHz bands; after amplification the signal will be repeated in the
neighborhood and inside the caravan. PhoneBoosterVan has an AGC system for the automatic gain control
and output signal level control. The system is bi-directional, the outdoor antenna receives the signals from
the cell tower and transmit it to the PhoneBoosterVan, the PhoneBoosterVan amplifies the signals and the
indoor antenna sends it to your mobile device. In the same time the signal produced by your mobile device
is also received by the indoor antenna, amplified by the PhoneBoosterVan and sent back to the cell tower
through the outdoor antenna.
In Figure 1 PhoneBoosterVan block diagram.
NOTE: PhoneBoosterVan amplifies and repeat the mobile signal phone. If there aren't mobile signals in
the place where we are, the PhoneBoosterVan is inefective.
PhoneBoosterVan should follow system requirements of mobile signal
enhancement equipment, assure good grounding and lighting protection.
PhoneBoosterVan power supply voltage should meet standards of
security requirements; any operation should be carried out only after
cutting off power in advance. Only the professional is authorized for the
operation.
Do not dismantle machine, maintain or displace accessories by yourself.
In this way the equipment can be damaged and you can even get an
electric shock.
Do
not
open
the
PhoneBoosterVan or open the cover of module to touch the electronic
components. The components will be damaged due to electrostatic
discarge.
Keep away from heating equipment, becouse the PhoneBoosterVan will
dissipate heat during working. Do not cover PhoneBoosterVan with
anything that influences heat-dissipation.
PhoneBoosterVan,
touch the
pag. 75
EN
module of

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis