Led Description; Power Supply; System Monitoring; App Signal Supervisor Download And Setup - Teleco phoneBoostervan Bedienungsanleitung

6.4

LED description

ALARM LED
BLUETOOTH LED
Table 1. LED description.
6.5

Power Supply

Connect the +12Vdc cable to the power supply battery. Pay attention to the cable polatiry, red +12V, black
ground cable.

7 System monitoring

By SignalSupervisor APP present in Google Play store for android system or App Store for IoS system, users
can control in every place where they are, the state of their PhoneBoosterVan.
7.1

APP Signal Supervisor download and setup

After download and app installation, is necessary the registration with a valid e-mail address, activation
code and a password. At this point the registration is complete, see Figure 5.
Figure 5.
LED STATUS MEANING
Solid blue
Blue, led blink every second
Red, blink every half second
Blue, led blink every second
Blue, led blink every half
second
pag. 81
Output level ok
Maximum output level
PhoneBoosterVan
disconnected for too high
downlink signal
Bluetooth not connected
Bluetooth connected
Email address
EN