ARENDO 303578 Handbuch Seite 12

3. Fill the tank with tap water. Use the measuring cup supplied. Make sure that
you do not fill more than 100ml of water. Then add 1-2 drops of any essential
oil or aroma. Make sure that water is present in the diffuser.
4. Place the lid of the diffuser on the device and make sure that it has been
fitted properly.
5. Connect the DC coaxial adapter to the diffuser and then insert it into a pro-
perly installed power socket. The diffuser is ready for use. To switch on the
diffuser, press and hold the "Mist On/Off" button briefly. The diffuser now
starts operating. Press the button briefly a second time to set the timer to
180 minutes. Pressing the button a third time sets the diffuser to 120 minu-
tes. Press the button a fourth time to set the timer to 60 minutes. Pressing it
a fifth time switches the device off.
6. "LED On/Off" button
With the "LED On/Off" button, it is possible to adjust the light of the diffuser.
Pressing the button for the first time switches on the colour-changing function.
Pressing the button repeatedly changes between the individual colours in two
different brightness levels.
12
English