Chal-Tec 10002073 Bedienungsanleitung Seite 11

Wheel mounting
1. Loosen the screws of the front axle and
pull the axle out of the axle guide. Place
the wheel.
Fold the steering column up
1. Pull the lock lever up, move the steering co-
lumn from the collapsed horizontal position
in an upright position and lock the lever.
Handlebar mounting
1. Snap both sides of the handlebar in place.
Downloaded from www.Manualslib.com manuals search engine
2. Secure the axle with the screws. Tighten
the screws until there is barely any free
movement of the front wheel possible
2. Check the tightness of the steering column by
slightly shaking.
2. Check that the handlebar is firmly in place
by vigorously moving the handlebar up and
down.
11