FOCUS FITNESS JET 2 Benutzeranweisungen Seite 12

Programs:
1. Manual
In the manual program you can enter your own training data by entering a maximum
time, distance or calories. With this, the training will be based on your own settings.
You can also press START directly to start the workout without data. After this, the
speed and inclination can be increased or decreased with the UP / DOWN and PLUS
/ MIN buttons.
2. Programs
By means of the PROGRAM key you can choose between the various pre-
programmed programs, with MODE / ENTER you can select the program and you
can install a desired time or distance. You can also press START directly to start the
workout without a set time or distance.
3. User program
By means of the UP / DOWN and PLUS / MIN keys you can install the speed, with
the MODE / ENTER key you confirm the data and you will proceed to the next column
to program an entire training yourself. After installing, you can press START to start
the workout.
4. Body fat
For the body fat training you will be asked for different data, these have to be filled in
with + and -.
F1 - Sex (1 is male, 2 is female).
-
F2 - Age
-
F3 - Height
-
F4 - Weight
-
Your BMI will then appear on screen.
Other information:
The treadmill requires an earthed socket.
-
If the treadmill is not used for a while, the sleep mode will be activated. The data is
-
retained and is shown again when the training is restarted.
Folding
Return the treadmill to the
inclination 0.
Lift the tread until it is locked
in place.
Handleiding – Loopband – Focus Fitness – Jet 2 – FFLB034
Jet
Unfolding
Grasp the tread.
Push the lock mechanism
with your foot.
The tread lowers slowly.
2
Shifting
Pull the plug out of the socket.
Fold up the treadmill.
Grasp the handles
Tilt your treadmill towards
yourself and move the
treadmill.
12