Safety Warnings; Instruction Manual - Makita DDF483 Betriebsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Drilling capacities Steel
Wood
Fastening capacities Wood screw
Machine screw
No load speed High (2)
Low (1)
Overall length
Rated voltage
Battery cartridge
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Work mode: drilling into metal
Vibration emission (a ) : 2.5 m/s
h,D
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
BL1815N, BL1820,
) : 77 dB(A)
pA
2
or less
2
DDF483
162 mm
BL1830, BL1830B,
BL1820B BL1840, BL1840B,
BL1850, BL1850B,
BL1860B
1.3 kg 1.5 kg
WARNING:
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings
WARNING:
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
4 ENGLISH
DDF083
13 mm
36 mm
6 mm x 75 mm
M6
-1
0 - 1,700 min
-1
0 - 500 min
124 mm
D.C. 18 V
BL1815N, BL1820,
BL1820B
1.1 kg
The vibration emission during actual
Be sure to identify safety measures
Read all safety warnings and
BL1830, BL1830B,
BL1840, BL1840B,
BL1850, BL1850B,
BL1860B
1.3 kg