Carson BLUSTER 400 507012 Betriebsanleitung Seite 6

4. Always be aware of the rotating blades.
GB
During the operation of your new Bluster 400 3D helicopter the
main rotor and tail rotor will be spinning at a high rate of speed.
The blades are capable of inflicting serious bodily injury and
damage to you and to others. Be conscious of your actions and
be careful to keep your hands, face, eyes, and loose clothing
away from the blades and gears.
Always fly your model a safe distance from yourself and others
as well as nearby objects. Never take your eyes off the model
5. Keep your Bluster 400 3D helicopter
away from heat and humidity.
Your new Bluster 400 3D helicopter is a hi-tech electronic
device; never subject your model to temperature extremes,
do not leave your model in an automobile for extended times
because high temperatures can damage the delicate electronic
and plastic parts.
Charge mode and warning
Charge the Lithium polymer battery with the supplied wall
charger. Observe the polarity of the battery and the charger
and ensure that the connection is correct, do not force the
connector or damage may result. The Lithium charger is
capable of charging the lithium Polymer battery at 1.2 Amp.
Please charge your battery prior to the first use so that you
start with a freshly charged battery. When the battery is
charged the LED will glow green, during charging the LED on
the charger will glow red.
To ensure safe operation do not charge the battery for
extended periods of time. Never leave the charger unattended
and never leave the charger on overnight. Adult supervision is
required during the charging of lithium batteries.
6 CARSON 3D Helicopter Bluster 507012
or leave it unattended while it is
turned on. Always turn off your
model, then your transmitter
after each flight.
The supplied 1800 mAH Li-Poly battery should be charged
with the Li-Poly battery charger only. Charging the battery
with a charger not designed specifically for lithium batteries
can cause fire or and explosion of the battery. Please observe
all safety instructions. If the battery ever becomes puffy or is
damaged dispose of the battery in a safe container outdoors
away from flammable materials.
1. Do not place the battery on or near to things which might
catch fire during the charging process.
2. Charge the lithium-polymer battery on a non-flammable
base, e.g. on a metal plate.