HQ Power VDPDMXC174 Handbuch Seite 4

LCD Display
b. Setup
• Unit Setup
The unit is preset to allocate 16 channels per fixture. In order to assign your fixtures to the scanner buttons
located on the left side of the unit you will need to space your fixtures 16 DMX channels apart.
Use the following chart for DMX addressing:
Fixture Number
1
2
3
4
5
6
7
8
9
10
11
12
• Enabling the PROGRAM Mode
To enable the PROGRAM mode, hold the PROGRAM button for a few seconds until the LED is lit.
• Setting Up the Joystick
1. Press and hold the PROGRAM button until the LED is lit.
2. Press and hold the MODE and FINE buttons simultaneously. The assign LED should light. If the reverse LED
lights, press FINE and MODE again to enter the ASSIGN mode.
3. Use the bank UP and DOWN keys to select the axis you wish to assign (pan or tilt).
4. Use the TAP / DISPLAY button to select 16 or 8-channel mode.
5. Press the button corresponding to the scanner you wish to assign.
6. While holding the mode button press the scene number corresponding to the slider which controls the
movement (example: If the pan is controlled by slider number 4, press and hold the MODE button while
tapping scene button 4).
7. When finished, press the MODE and FINE buttons simultaneously again to exit the ASSIGN mode.
c. Scenes
• Programming a Scene
1. Enter the PROGRAM mode (See "Enabling the PROGRAM Mode").
2. Check the blackout key and verify that the LED is not lit. If the LED is lit, press it once to exit the BLACKOUT
mode.
VDPDMXC174
Scene 1
Bank 1
Chase 1 is activated
The ninth step of a chase
DMX value (000 ~ 255)
The current speed is 1 minute and 54 seconds
The time of the last two taps is 4.25 seconds
Assign DMX channels 4 and 5
Reverse DMX channels 10 and 13
Digital DMX Address
1
17
33
19
65
81
97
113
129
145
161
177
Description
Scanner DIP Switch Setting
1 is ON
1 and 5 are ON
1 and 6 are ON
1, 5 and 6 are ON
1 and 7 are ON
1, 5 and 7 are ON
1, 6 and 7 are ON
1, 5, 6 and 7 are ON
1 and 8 are ON
1, 5 and 8 are ON
1, 6 and 8 are ON
1, 5, 6 and 8 are ON
4 VELLEMAN