Storage; Dismantling; Spare Parts - Fort GRUPPO FRESA Gebrauch Und Wartung

ENGLISH
oil in a collecting tank
- Position the rotary hoe in such a way that the
plug «T» is turned face-upwards.
- Pour the following quantity of new oil through
the hole «T».
model Weight (Kg)
A
B - C
D - E
F
- Close the plug again and pay attention not to
damage the seal.

4.3 STORAGE

If you do not intend to use the rotary hoe for a
certain period of time, we suggest to follow the
here below listed instructions so that the machine
will be efficient when you use it again.
- Clean all the parts of the cutter bar carefully
- Check that the attachment is in perfect working
order, otherwise replace the damaged or worn
parts.
- Cover the attachment with a cloth and store it in
a covered area, sheltered from bad weather,
from frost and from moisture.
- If you do not intend to use the rotary hoe for
quite a long time, coat it with plenty of lubricant
to prevent it from rusting.

4.4 DISMANTLING

If the attachment is dismantled, recover as many
components as possible. Dispose of the remain-
ing parts in compliance with the anti-pollution regu-
lations of your country.

4.5 SPARE PARTS

The spare parts shall be ordered to the area con-
cessionary agent.
The attachment shall be repaired by skilled tech-
nicians only.
Type of OIL
0.150 EP 320
0.200 EP 320
0.250 EP 320
0.500 EP 320
17