MSI K8NGM-V Serie Bedienungsanleitung Seite 16

Serial ATA HDD Connectors: SATA1~2
T he mainboard provides dual high-speed Serial ATA interface ports. The ports support 1
generation Serial ATA data rates of 150 MB/s and are full
specifications. Each Serial ATA connector can connect to 1 hard disk drive.
PIN SIGNAL
1 GND
3 TXN
5 RXN
7 GND
MSI Reminds You...
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 1-2 pin position. Avoid
clearing the CMOS while the system is on; it will damage the mainboard.
IrDA Infrared Module Header: JIR1 (Optional)
The connector allows you to connect to IrDA Infrared module. You must
configure the setting through the BIOS setup to use the IR fun
compliant with Intel
PCI Express Slots
The mainboard provides a PCI Express
x16 slot, a PCI Express x1
Express slots, as a high-bandwidth, low p
count, serial, interconnect technology. PC
Express architecture provides a high
performance I/O infrastructure for Desktop P
per second over PCI Express x1 lane
purpose I/O. Also, desktop platforms with PCI Ex press Architecture will be designed to deliver highes
performance in video, graphics, multimedia and other sophisticated applications.
Downloaded from www.Manualslib.com
PIN SIGNAL
2 TXP
4 GND
6 RXP
®
Front Panel I/O Connectivity Design Guide.
slot. The PCI
for Gigabit Ethernet, TV Tuners, 1394 controllers, and general
manuals search engine
y compliant with Serial ATA 1.0
ction.JIR1 is
PCI_E1(PCI Express x16)
in
I
PCI _E2(PCI Express x1)
l atforms with transfer rates starting at 2.5 Giga transfers
10
st
7
1
[6]NC
IRRX[2]
[5]NC
IRTX[1]
t