Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Memory Speed/CPU FSB Support Matrix
Memory
FSB
800 MHz
CPU Installation Procedures for Socket 754
1.
Please turn off the power and unplug the power cord before installing the CPU.
2.
Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-degree
angle.
3.
Look for the gold arrow on the CPU. The CPU can only fit in the correct orientation. Lower the
CPU down onto the socket.
4.
If the CPU is correctly installed, the pins should be completely embedded into the socket and
can not be seen. Please note that any violation of the correct installation procedures may
cause permanent damages to your mainboard.
5.
Press the CPU down firmly into the socket and close the lever. As the CPU is likely to move
while the lever is being closed, always close the lever with your fingers pressing tightly on top of
the CPU to make sure the CPU is properly and completely embedded into the socket.
Installing AMD Athlon64 CPU Cooler Set
When you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the
top to prevent overheating. If you do not have the heat sink and cooling fan, contact your dealer to
purchase and install them before turning on the computer.
1.
Detach the shield of the backplate's paster.
2.
Turn over the mainboard, and install the backplate to the proper position.
3.
Turn over the mainboard again and place the mainboard on the flat surface. Locate the two
screw holes of the mainboard.
4.
Align the retention mechanism and the backplate. Fix the retention mechanism and the
backplate with two screws.
Downloaded from
www.Manualslib.com
DDR 266
DDR 333
OK
manuals search engine
DDR 400
OK
OK
5
Werbung
Inhaltsverzeichnis
