Listening To Tape - Reflexion HIF1937 Bedienungsanleitung

REMARKS:
The system can detect and read the file under MP3 and WMA format only though the USB port.
If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format, some
MP3 player may not be able to play via the usb socket. this is not a maul-function of the system.
Connecting the USB upside down or backwards could damage the audio system or the storage media (USB
thumb drive). Check to be sure the direction is correct before connection.

LISTENING TO TAPE

1. Set the Function button (6) to " TAPE " mode. The system will start play-back automatically after inser-
ting the cassette tape.
Press " TAPE FORWARD / EJECT " Button (33) half inwards during playback mode. The tape will wind
forward.
2. Slightly press the " TAPE FORWARD / EJECT " Button (33) again to resume playback.
3. Press the" TAPE FORWARD / EJECT " Button (33) completely inwards and the cassette tape will be
ejected through the cassette door cover (34).
ENCODING OF CD/PHONO INTO MP3 FILE
The system is able to encode normal CD, CASSETTE or TURNTABLE to MP3 format and recording at me-
mory media with USB connecting port.
ENCODING FROM CD
Encoding 1 track:
Perform normal playback of the cd track you want to encode & record,
Press " RECORD " button (9) twice during the playback of the desire track, unit will display. Encoding is pefor-
rming now.
Press the STOP button to finish recording the track.
Encoding 1 disc:
Place a cd with the printed side facing up inside the tray & then close the co door
Press the RECORD button (9) twice after focus search completed. unit will display "REC". Encding is perfo
ming now.
After completing of encoding, unit will stop playback automatically.
Remarks:

The recording speed is 1:1 and according to the actual plying time of the cd track.

The system will creat a " RECORD " folder and then store the encoding track in it.

The recording format is preset at – mp3 bit rate: 128 kbps, sampling rate: 44.1khz.

No song title will be recorded during encoding mode.

To interrupt the recroding, press the " record " button again during record mode.
Recording will be completed only entire song being encoded, if terminate the encoding process
intermediately, there is no track being recorded nor stored to the usb.
Copying of MP3/WMA file
If putting a mp3/wma disc instead of a cd-disc, the system will copy the files to the usb or sd card
if press the " record " button (9). The operation proce-dures is same as cd encoding as stipulate
on above, and the system will switch to copying mode only if mp3/wma file being read.
18