Honeywell FEMA TAM Serie Montage- Und Bedienungsanleitung Seite 46

Screw Terminal Connection (Housings
3... and 5...)
Accessible after removing cover at screw
terminal housings 2... and 5...
CAUTION:
SWITCH OFF CURRENT
BEFORE OPENING!
 Unfasten 4 screws and remove cover.
 Pull connecting cable through cable
gland and wire terminals according to
wiring diagram.
 Fasten cable gland. CAUTION –
Failing to fasten the cable gland will
cause loss of IP protection and strain
relief of the cable!
46
1. Basic Equipment of the Thermostats
Factory Adjustment
In the case of the series TX, TAM, and
TRM devices, switching occurs at the set
scale value. This means that the adjust-
ment switching temperature on the scale
corresponds to the switching point when
the temperature drops; the reset point is
higher by the value of the switching
difference.
MU2B-0375GE51 R0220D