PITCHING INSTRUCTIONS
4
5
6
•
You are ready to inflate your awning.
•
Before you inflate your awning make sure you have
read and understood the pump and inflation sections of
this instruction. You must follow these instructions to
ensure proper inflation of your awning.
•
Ensure that the floor strap is looked before inflation.
•
Inflate your awning using the pump supplied ensuring
the safety pressure valve is connected to the pump at
all the times.
•
Ones the air tube has been inflated peg the two storm
straps out as this will hold the awing in place whilst you
peg.
•
Your awning should look the diagram above. You can
now peg now the awning.
•
We recommend pegging the corners first then working
forward from the rear corner in turn until all pegging
points have been pegged.
4
5
6
6