Specifications - Sennheiser Quadpack QP 3041 Bedienungsanleitung

Overall unit
Receiver slots for up to four EK 3041 receivers:
RF connection:
Antenna inputs:
Antenna output
(for supplying two Quadpacks with the signals of two
antennas):
Operating switch for overall unit (incl. receivers):
Operation indicator for overall unit:
Operation indicator for receiver modules:
Connector for external DC power supply:
Audio outputs:
Monitor output:
Selection of monitor receiver:
Indication of selected monitor receiver:
Selector switch for mic / line level :
Level control for mic / line level :
Wideband input module can be exchanged
for a selective input module:
Supply voltage range:
Current consumption with 4 receivers, peak deviation,
headphone output at nominal load:
Supply voltage for antenna boosters:
Fuse:
Temperature range:
Dimensions:
Weight incl. receivers:
Wideband input module
Frequency range:
32
Downloaded from www.Manualslib.com

Specifications

manuals search engine
at the front, fastened with four M2 screws respectively,
without additional adapter
via special angled plug
2 x BNC at the rear
1 x BNC at the rear
rocker switch at the rear
red LED at the front
4 x LED at the front
4-pin XLR, male
3-pin XLR, male
"
1/4 (6.35 mm) jack socket
via 4 "push-push" keys
color of operation indicator for receiver module chan-
ges from red to green
slide switch at the rear
potentiometer at the rear
2 input modules at the rear
–
10.5 18 V , 12 V
DC DC nominal
490 mA/12 V
DC
–
2 x 10.5 18 V, 50 mA nominal
1 AT
–
10 ... +55° C
approx. 214 x 230 x 85 mm (1/2 19
3,520 g
–
0 900 MHz
"
, 2 U)