Operation; Operating The Receivers; Turning The Quadpack On And Off; Monitoring - Sennheiser Quadpack QP 3041 Bedienungsanleitung

µ
28
Downloaded from www.Manualslib.com

Operation

Operating the receivers

The EK 3041 receivers mounted into the Quadpack are operated as ususal.

Turning the Quadpack on and off

To turn the Quadpack on, set the
tion "I". The operation indicator
To turn the Quadpack off, set the
position "0". The operation indicator
Note:
All receivers mounted into the Quadpack are turned on and off via the
Quadpack's
receivers can be turned on and off via their respective ON buttons.
´

Monitoring

For monitoring the audio signals of the mounted receivers, connect a pair of
headphones to the headphone output ¶.
» ¿ ¶
Press the monitor key
monitor. The color of the control LED
ges from red to green.
You can also press several monitor keys if you wish to monitor the audio
signals of several receivers simultaneously. The control LEDs of all
selected receivers light up green.
Note:
The monitor output has enough amplification headroom in order to
enable monitoring even at low modulation levels. The volume at the
monitor output should therefore only be turned up gradually!
manuals search engine
POWER
´
lights up red.
POWER
´
goes off.
POWER (ON/OFF) switch. If required, the individual
»
of the receiver whose audio signal you wish to
¿
µ
(ON/OFF) switch to posi-
µ
(ON/OFF) switch to
of the selected receiver chan-