Restoring Factory Settings - Sennheiser FLX 70 Bedienungsanleitung

The microphone is muted. A beep is heard every 5 seconds in the
speaker.
To un-mute the headset microphone:
!
Press either the hook button
or .
The beeping stops. The microphone works as usual.

Restoring factory settings

You can restore the following settings to factory settings:
• speaker volume
• ring tone volume
• pairing
!
Set the headset to pairing mode as described under "Pairing the
headset to mobile phones or other Bluetooth devices" on page 13.
!
Press and hold both the volume but-
tons
pairing mode until the LED
ing for a short time.
Afterwards the LED
ingly in red and blue to indicate that the
headset is in the pairing mode. The head-
set needs to be paired again before using.
Downloaded from www.Manualslib.com
and while the headset is in
manuals search engine
or one of the volume buttons
stops flash-
flashes alternat-
21