Electrical Installation; Transport And Storage; Transport Of The Scanner; Storage Of The Scanner - KLEIBER SC 1 Betriebsanleitung

9 Transport and Storage

8 Electrical Installation

DANGER:
There is danger of injury and possible equipment damage by connection of cables under power!
Never connect cables under power! Make sure that the voltage supply is switched off before connection
of the cables to the scanner!
The scanner is powered by a voltage of 24 V DC, 50 Hz, 0.015 A. With connection to the power the instrument
operates immediately.
Color cable core
White
Brown
Green / Yellow
9 Transport and Storage

9.1 Transport of the Scanner

CAUTION:
Environmental factors, impacts and the formation of water condensation may damage some compo-
nents!
When transporting the scanner, take suitable measures to protect all components from environmental
factors, impacts and the formation of water condensation! Temporary storage of the scanner in the
open air is not permitted!
Look at Taking out of service (section 11.1) at page 8 how to dismantle the scanner.
It is advisable to use the original packaging for the shipping of the scanner. If the original packaging is no
longer available, the scanner should be shipped in a cardboard box with shock-absorbing PE material.
When transporting the scanner observe the following instructions:
• Take great care when transporting the scanner to avoid damage through the effect of force, or careless
loading or unloading.
• Avoid jerks, vibrations and the formation of condensed water due to severe temperature deviations while
transporting.
• In the case of overseas shipping, a suitable desiccator (e.g. silica gel) should be inserted and the scanner
should be sealed together with the desiccator in a protective plastic sheet.
• If the scanner is not immediately installed after delivery and put into operation, then it should be carefully
stored in a location protected against dust and humidity (Storage of the Scanner (section 9.2) at page 7).
The scanner is thus ready to be shipped.

9.2 Storage of the Scanner

CAUTION:
Environmental factors, impacts and the formation of water condensation may damage some compo-
nents!
Store the scanner only in dry areas without large variations in temperature! The atmosphere should be
free of dust and corrosive vapors!
7
Meaning
+24 V supply voltage
0 V supply voltage
PE
SC 1