Television Keys; Switching On; Quick Installation - Philips 17PF8946 Bedienungsanleitung

Television keys

Switching on

VOLUME

Quick installation

When you turn on the TV set for the first
time, a menu is displayed on screen.This menu
prompts you to select the country and
language for the menus:
w
If the menu is not displayed, press and hold down
"
the
seconds to display the menu.
& Use the
select your country and validate with
If your country does not appear in the list, select
choice ". . . "
é Next select your language using the
Downloaded from www.Manualslib.com
VOLUME PROGRAM
PROGRAM
Plug'n'Play
Country Language
GB English
"
+ and - keys on the TV set for 5
îÏ
keys on the remote control to
manuals search engine
• .: to switch the TV on or off.
• VOLUME - +: to adjust sound level.
• PROGRAM > <: to select programmes.
• MENU: to access or close menus,
simultaneously press the - and + keys. The >
< keys can be used to select an adjustment
and the - + keys to make that adjustment.
To switch on the set, press the on/off key. A
green indicator comes on and the screen lights
up. Go straight to the Quick Installation
chapter. If the TV remains in standby mode(red
indicator), press the P
control.
The indicator will flash when you use the remote
control.
keys and validate with
" The search starts automatically.All the available
TV programmes and radio stations will be
stored. This operation takes a few minutes.The
display shows the progress of the search and
the number of programs found. At the end of
the search, the menu disappears.
To exit or interrupt the search, press
programme is found, consult the possible solutions p. 12.
' If the transmitter or cable network sends the
automatic sort signal, the programs will be
numbered correctly. In this case, the installation
is complete.
( If this is not the case, you need to use the Sort
menu to number the programs correctly.
Some transmitters or cable networks broadcast
¬
.
their own sort parameters (region, language, etc.). In
this case, indicate your choice using the
keys and validate with
îÏ
#
key on the remote
¬
.
H
. If no
îÏ
¬
.
5