ASROCK P4i65PE-M Handbuch Seite 6

Downloaded from www.Manualslib.com
BIOS: AMI legal BIOS,
Supports "Plug and Play",
ACPI 1.1 compliance wake up events,
Supports jumperfree,
CPU frequency stepless control
(only for advanced users' reference, see CAUTION 7)
OS: Microsoft
CAUTION!
1. About the setting of "Hyper Threading Technology", please check page 22
of "User Manual" in the Support CD.
2. Please check the table below for the memory support frequency and its
corresponding CPU FSB frequency.
CPU FSB Frequency
800
533
400
*
When you use an FSB800-CPU on this motherboard, it will run at
DDR320 if you adopt a DDR333 memory module.
3. This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 8 for proper installation.
4. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.
5. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!
6. Power Management for USB 2.0 works fine under Microsoft
SP1 / 2000 SP4. It may not work properly under Microsoft
ME.
7. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
6 6 6 6 6
ASRock P4i65PE-M Motherboard
manuals search engine
® ®
Windows 98 SE / ME / 2000 / XP compliant
Memory Support Frequency
*
DDR266, DDR320 , DDR400
DDR266, DDR333
DDR266
® Windows
® Windows
® XP
® 98/