ASROCK 775V88 Handbuch Seite 8

Downloaded from www.Manualslib.com
2.1 775-LAND CPU Installation 2.1 775-LAND CPU Installation 2.1 775-LAND CPU Installation 2.1 775-LAND CPU Installation 2.1 775-LAND CPU Installation
For the installation of Intel 775-LAND CPU,
please follow the steps below.
Before you insert the 775-LAND CPU into the socket, please check if
the CPU surface is unclean or if there is any bent pin on the socket.
Do not force to insert the CPU into the socket if above situation is
found. Otherwise, the CPU will be seriously damaged.
Step 1. Open the socket:
Step 1-1. Disengaging the lever by depressing
down and out on the hook to clear
retention tab.
Step 1-2. Rotate the load lever to fully open po-
sition at approximately 135 degrees.
Step 1-3. Rotate the load plate to fully open po-
sition at approximately 100 degrees.
Step 2. Insert the 775-LAND CPU:
Step 2-1. Hold the CPU by the edges where are
marked with black lines.
Step 2-2. Orient the CPU with IHS (Integrated
Heat Sink) up. Locate Pin1 and the two
orientation key notches.
Pin1
orientation
key notch
775-LAND CPU
8 8 8 8 8
ASRock 775V88/775V88+ Motherboard
manuals search engine
775-Pin Socket Overview
Pin1
alignment key
orientation
key notch
775-Pin Socket
alignment key