ASROCK 775V88 Handbuch Seite 16

Downloaded from www.Manualslib.com
Serial ATA (SATA)
Power Cable
connect to the SATA HDD
(Optional)
power connector
USB 2.0 Header
(9-pin USB67)
(see p.2, No. 18)
Infrared Module Header
(5-pin IR1)
(see p.2, No. 26)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.2, No. 20)
(AUX1: see p.2, No. 23)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.2, No. 22)
System Panel Header
(9-pin PANEL1)
(see p.2, No. 15)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.2, No. 16)
1 6 1 6 1 6 1 6 1 6
ASRock 775V88/775V88+ Motherboard
manuals search engine
Please connect the black end of
SATA power cable to the power
connector on the drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
ASRock I/O Plus
6 ready-to-use USB 2.0 ports on
the rear panel. If the rear USB
ports are not sufficient, this
USB 2.0 header is available to
support 2 extra USB 2.0 ports.
This header supports an optional
wireless transmitting and
receiving infrared module.
These connectors allow you
to receive stereo audio input
from sound sources such as
CD1
AUX1
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for the front
panel audio cable that allows
convenient connection and
control of audio devices.
This header accommodates
several system front panel
functions.
Please connect the chassis
speaker to this header.
TM provides you