Cable Cross-Section; Projector Protection - ccei ZM20 Betriebsanleitung

Technical Manual

5. Cable Cross-Section

The voltage drop in the supply cable
of the ZM20 & 40 (& ZM40K) cable
should be limited in order to comply
with the applicable standards and en-
sure optimal illumination.
Follow the table opposite (one pro-
jector per cable);

6. Projector Protection

Independent protection is necessary for each ZM20 & 40 (& ZM40K). Protection must be ensured in the
secondary of the transformer using fuses or breakers at 3A (M20 / 20K) , 5A (M40 & M40K).
ZM20 & 40 (& ZM40K)
1,5 2,5
18,2
Max.
10,9 (M20)
length (m)
(M20)
10,0
(M40)
CROSS-SECTION (mm²)
4 6
29,1 43,6
(M20) (M20)
17,0 25,6
(M40) (M40)
v3.0ML
10
42,6
(M40)
5