Spare Parts - Baltic 150N Gebrauchsanweisung

BALT I C LIFEJAC KE T S - US ER 'S GUI DE
Release the zip slider by pulling it to the end of the longer zip
1.
lifejacket. Pull the slider back clockwise, to the right hand side of the lifejacket.
Put the zip together like on a normal jacket
2.
lifejacket, at the same time folding the lung according to the instructions below.
Fold under in a Z-shape
3.
Fold under in a Z-shape
4.
Fold under
4.
Fold under in a Z-shape
6.
Fold under in a Z-shape
7.
Fold under in a Z-shape
8.
Fold under
9.
The lifejacket is closed by pulling the slider round the lifejacket
10.
next to the two quick release openings
end-stop at the end of the zip
Make sure the activating cord is exposed by pushing it through the opening in the back of the
11.
outer cover before closing the lifejacket

SPARE PARTS

The following spare parts are available from Baltic retailers:
Rearming kit Baltic 38 g CO
Capsule, Part No 2407. Includes automatic capsule.
Whistle
Reflector kit
Crutch strap kit 30 mm
ACCESSORIES
There are a number of accessories for inflatable lifejackets, which can be used in different situations.
These accessories are available through Baltic retailers.
Automatic emergency light
Sprayhood
Protective cover
Weld protection
The model name is written on the front of the product.
The date of manufacture is printed on the product's inspection history label.
14 , and pull the slider anticlockwise round the
15:1 .
15:2 .
.
15:3
16 .
17:1 .
17:2 .
17:3 .
1 , 2
19 . Place the zip's end in the lifejacket
3 .
cylinder, Part No 2438. Includes 38 g CO
2
13 , on the left hand side of the
18 . Secure the Velcro strip
. Take care to stop the slider at the first
20 .
cylinder.
2
13