Initial Use - Beurer Barbers Corner HR 4000 Gebrauchsanweisung

Attachments

7. Initial use

You can operate the device with the battery as well as the supplied
mains adapter.
Battery operation
In order to be able to operate the device with the battery, fully charge
the battery for 60 minutes prior to initial use. The operating life of the
device is approx. 60 minutes when it is fully charged.
To charge the battery, proceed as follows:
1. Ensure that the device is switched off.
2. Connect the mains adapter to a suitable socket.
3. Plug the other end of the mains adapter into the con-
nection socket on the underside of the device. The
charge indicator now begins to flash. The battery indi-
cator shows you the current battery state in percent.
As soon as the battery is fully charged, the charging
indicator goes out.
Long comb attachment
Suitable for cutting lengths of 15-27 mm
(3-mm increments).
Short comb attachment
Suitable for cutting lengths of 1-12 mm
(3-mm increments).
Comb attachment for slim contour blade
Suitable for cutting lengths of 1 mm, 3 mm
and 5 mm.
The comb attachment for the slim contour
blade can only be used with the slim contour
blade attachment.
Slim contour blade attachment
Suitable for precise contour styling.
23