Initial Use - Beurer HR 5000 Gebrauchsanweisung

Attachments

7. Initial use

You can operate the device using the battery or the mains adapter
supplied.
Battery operation
In order to be able to operate the device with the battery, fully charge
the battery for 60 minutes prior to initial use. The operating period of
the device is approx. 60 minutes when it is fully charged.
To charge the battery, proceed as follows:
1. Ensure that the device is switched off.
2. Connect the mains adapter to a suitable socket.
3. Plug the other end of the mains adapter into the con-
nection socket on the underside of the device. The
charging indicator now begins to flash. The battery in-
dicator shows you the current battery state in percent.
As soon as the battery is fully charged, the charging
indicator goes out.
4. Once the charging process is complete, pull the mains adapter
out of the socket and the device. The device is now ready for use.
Quick charging
If you have forgotten to charge the hair clippers before use, the quick-
charge function helps. Connect the device to the power supply for
this purpose. The device will be ready for a complete shave using
battery operation within 5 minutes.
Mains operation
To operate the device with the supplied mains adapter, proceed as
follows:
Long comb attachment
Suitable for cutting lengths of 18-33 mm
(3-mm increments).
Short comb attachment
Suitable for cutting lengths of 3-15 mm
(3-mm increments).
21