Disposal - Beurer Barbers Corner HR 4000 Gebrauchsanweisung

Cleaning comb attachments
Blow on the comb attachments after the application
in order to clean them of hair. You can also carefully
remove wet hair with your fingers.
To clean the comb attachments particularly thor-
oughly, you can rinse them under running water.
Proceed as follows:
1. Pull the relevant comb attachment off the device.
2. Hold the comb attachment under running water.
3. Leave the comb attachment to dry completely
before you reattach it to the device.
Cleaning the trimmer attachment and slim contour blade attach-
ment
Blow on the trimmer attachment and the slim contour blade attach-
ment after use in order to clean them of hair. You can also remove
wet hair with your fingers.
WARNING
When cleaning with your fingers, make sure that you do not injure
yourself on the sharp edges of the stainless steel blade.
To clean the stainless steel blade or the slim contour blade particu-
larly thoroughly, you can also rinse them under running water. Pro-
ceed as follows:
1. Pull the stainless steel blade or the slim contour blade up and off
the device.
2. Hold the stainless steel blade or the slim contour blade under run-
ning water, so that the stream of water runs through the stainless
steel blade or the slim contour blade from the inside out.
3. Allow the stainless steel blade or the slim contour blade to dry
completely before you reattach them to the device. Ensure that no
water gets inside the device! Risk of electric shock!
Applying oil to the stainless steel blade or the slim contour blade
In order to consistently achieve optimum cutting results, you
need to oil the stainless steel blade and the slim contour
blade after each time you clean them under running water.
Apply a drop of cutting oil to the stainless steel blade or the slim
contour blade, at the latest as soon as the oil indicator symbol lights
up in the display.

10. Disposal

For environmental reasons, do not dispose of the device in the house-
hold waste at the end of its useful life. Dispose of the device
at a suitable local collection or recycling point in your coun-
try. Dispose of the device in accordance with EC Directive
– WEEE (Waste Electrical and Electronic Equipment). If you
27