Using In Pc Monitor Mode - Philips 32PF432010 Bedienungsanleitung

Using in PC monitor mode

Your TV can be used as a computer monitor.
You must first of all connect the computer and adjust the resolution (see p. 6).
Note:
When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is
operated under electromagnetic interference environment but will not affect the performance of this
product.
For better performance, good quality VGA cable with good noise isolation filter is recommended.
Choosing PC mode
Press the
TV mode. If there is no PC signal for more than five seconds, the TV automatically goes into standby
mode.
Using the PC menus
Press the
adjust them (the settings are automatically saved).
Brightness
Sharpness
Colour Temp.
Audio selection
Reset to Factory
Auto Adjust
Audio selection
Reset to Factory
Audio selection
Reset to Factory
8
Downloaded from www.Manualslib.com
key on the remote control to switch the TV to PC mode. Press the
PC
key to access the specific settings of the PC monitor mode. Use the cursor keys to
MENU
Picture
39
Colour
Contrast
Store
PC Menu
Picture
TV
Features
Mode
Features
Phase 33
Clock
Format
PC Menu
Picture
Features
Reset YES
Mode
PC Menu
Picture
• TV Æ
• PC
Features
Mode
manuals search engine
Picture
• Brightness/Contrast : to adjust the brightness and
contrast.
• Horizontal/Vertical Position
and vertical placing of the image.
• : to adjust the colours (cool,
Colour Temperature
normal or warm).
Audio selection
To choose the sound reproduced on the TV
( or ).
PC TV
Features
• : eliminates the horizontal (
Phase/Clock
vertical ( Clock ) interfering lines.
• : to choose between large screen (
Format
or the original ( Native ) format of the PC screens.
• : position is set automatically.
Auto adjust
Reset to Factory
To return to the factory settings
Mode
To come back to TV mode.
key to return to
TV
: to adjust the horizontal
) and
Phase
)
Full screen