Using In Pc Monitor Mode - Philips 26PF3320/10 Bedienungsanleitung

All manuals and user guides at all-guides.com

Using in PC monitor mode

NOTE
– When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is
operated under electromagnetic interference environment but will not affect the performance of this product.
– For better performance, good quality DVI cable with good noise isolation filter is recommended.
PC Mode
Your TV can be used as a computer monitor.
The PIP function lets you display a
superimposed image to watch the TV channels
at the same time.
The PIP function only works if your PC has a digital
output.
You must first of all connect the computer and
adjust the resolution (see p.13).
Choosing PC mode
& Press the
key on the remote control to
AV
display the .
Source List
é Use the cursor </> key to select
then press the cursor ≥ key to switch the TV
to PC mode ( ).
DVI In
To return to TV mode, press the
and validate with ≥ key.
TV
Using PIP
While in PC mode you can call up a window
for TV channels.
Attention: the PIP feature is only available if a
computer is connected to the DVI In (see p. 13).
œ
& Press the
key to display the PIP screen.
The television image is reproduced in a small
superimposed window.
é Subsequent presses of the
the size of the window, switches to dual
screen and turns PIP off.
" Use the keys to change the programmes
P –/+
of the PIP screen.
Here is the list of the different display resolutions available on your TV:
Digital PC (DVI-I)
Analogue PC (YPbPr)
10
Using the PC menus
Press the
settings of the PC monitor mode. Use the
cursor to adjust them (the settings are
automatically saved):
• Picture:
-
-
-
• Audio Selection: to choose the sound
and
PC
reproduced on the TV (PC or TV).
• Features:
-
key, select
AV
-
-
-
• Reset To Factory Setting: to return to the
factory settings (default settings).
*These adjustments are not available when a
computer is connected to the
œ
key changes
640 x 350 p
640 x 480 p
720 x 400 p
640 x 350 p
640 x 480 p
key to access the specific
MENU
: to adjust the
Brightness / Contrast
brightness and contrast.
: to adjust the
Horizontal / Vertical*
horizontal and vertical placing of the image.
: to adjust the colours (cold,
Adjust Colour
normal or warm).
*: eliminates the horizontal
Phase/Clock
( ) and vertical ( ) interfering lines.
Phase Clock
: to choose between full screen or
Format
native format of the PC screens.
: to adjust the size and position of the
PIP
PIP screen.
: position is set automatically.
Auto Adjust*
DVI In
800 x 600 p 1152 x 864 p
832 x 624 p 1280 x 960 p
1024 x 768 p 1280 x 1024 p
720 x 400 p 832 x 624 p
800 x 600 p 1024 x 768 p
.