Using The Radio; Using In Pc Monitor Mode - Philips 15PF5120 Bedienungsanleitung

Using the radio

Choosing radio mode
& Press the
key on the remote control to
AV
display the
Source List
é Use the cursor </> key to select
and then press the cursor ≥ key to switch the
TV to radio mode.
To return to TV mode, press the AV key, select
TV and validate with ≥key.
In radio mode the number and name of the
station (if available), its frequency and the sound
mode are indicated on the screen.
Selecting programmes
Use the / or
0 9 P -/+
stations (from 1 to 40).
List of radio stations
Press the ı key to display / hide the list of
radio stations.Then use the cursor to select a
station.

Using in PC monitor mode

NOTE
– When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is
operated under electromagnetic interference environment but will not affect the performance of this product.
– For better performance, good quality DVI cable with good noise isolation filter is recommended.
PC Mode
Your TV can be used as a computer monitor.
You must first of all connect the computer and
adjust the resolution (see p.13).
Choosing PC mode
& Press the
key on the remote control to
AV
display the
Source List
é Use the cursor </> key to select
then press the cursor ≥ key to switch the TV
to PC mode (
DVI-I In
To return to TV mode, press the
and validate with ≥ key.
TV
Using the PC menus
Press the key to access the specific
MENU
settings of the PC monitor mode. Use the
cursor to adjust them (the settings are
automatically saved):
10
.
FM Radio
keys to select the FM
.
and
PC
).
key, select
AV
Using the radio menus
Use the key to access the specific radio
MENU
settings.
Searching radio stations
If you have used the quick installation all the
available FM stations will be stored.To start a
new search use the
Install
(for a complete search) or
a station by station search).These menus work
in exactly the same way as the TV menus.
Screen saver
In the menu you can activate / close
Features
the screen saver.The time, the frequency of
the station and its name (if available) move
across the screen.
• Picture:
-
Brightness / Contrast
brightness and contrast.
-
Horizontal / Vertical
and vertical placing of the image.
- : to adjust the colours (cold,
Colour Temp
normal or warm).
• Audio Selection: to choose the sound
reproduced on the TV (PC/HD,TV or Radio).
• Features (only available on certain versions):
- : eliminates the horizontal
Phase/Clock
( ) and vertical (
Phase
- : to choose between full screen or
Format
native format of the PC screens.
- : position is set automatically.
Auto Adjust
• Reset To Factory Setting: to return to the
factory settings (default settings).
menu :
Auto Store
(for
Manual Store
: to adjust the
: to adjust the horizontal
) interfering lines.
Clock