Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
PREPARING THE APPLIANCE
If the remote control doesn't work after replacing the batteries, remove and
reinsert the batteries after waiting about 5 minutes.
• It could result difficult to work with the remote control if the sensor on
the appliance is exposed to direct sunlight or to a strong artificial light.
• Try to make it work away from such bright sources.
• Avoid dropping the remote control, exposing it to impacts or stepping
on it.
• Do not pour water on the remote control.
• Do not use the remote control with other appliances simultaneously.
• If the appliance doesn't work even when using the remote control from
a close distance, it is necessary to replace the batteries.
The remote control batteries must be kept away from the range
of children.
If they're handled in the wrong way they could cause fires or
chemical burns.
Do not expose the batteries to temperatures higher than 100° C.
Do not charge or disassemble the batteries.
Exhausted batteries must be disposed in
the appropriate containers prepared for the
collection.
Do not throw batteries in household waste and
do not disperse them in the environment. Do
not dispose batteries in an incinerator, as they
could explode.
Select speed gear (Fig. F6)
Continuously press "Speed" button to select the speed from 1 to 12.
There is gear indicating light at the display; the indicator light (17) turns on according to
the set level.
38
USE
FAN 1886 R
Werbung
Inhaltsverzeichnis
