Led Indication - PSC Magellan 8100 Kurzanleitung

Quick Reference Guide
Downloaded from www.Manualslib.com
Table 1. Scale Zero Push Button Functions
PRESS
FUNCTION
DURATION
Momentary Zero Scale
Scale Diag-
4 Seconds
nostics Mode
a. By standard default, this function is normally disabled to prevent accidental activation
by users.
Table 2. Green and Yellow LED Functions
LED
INDICATION
Yellow LED on steady
a
Scale at Zero
Green LED on steady and dim
a
Scanner Active
Good Read
Green LED - bright flash
a
Indication
Green LED - Continuous flash-
Program Mode
ing
Indication
Green LED blinks at a
Sleep Mode
2-second rate
Indication
1 second off, 1/10 second on
Host Disabled
manuals search engine
When programmed to do so, the yellow LED should be
lit when no weight is on the scale, indicating scale at
zero. If it is not, press the switch to zero the scale. The
unit will sound a "click" upon pressing the button.
This mode allows system support personnel to trouble-
shoot problems with the scale. Momentarily press the
a
Scale Zero Push Button or cycle power to exit Scale
Diagnostics Mode.
DURATION
The scale is at rest and reads zero
weight.
The scanner is ready for operation.
Scanning is immediately available.
Indicates a bar code has been read
and decoded.
Indicates the scanner is in Label Pro-
gramming Mode. Cycle power to exit
Programming Mode.
The scanner motor and/or laser have
automatically switched off and the unit
has entered Sleep Mode due to
extended inactivity.
Host has disabled scanning.
COMMENT
COMMENT
3