Getting Started; Lens - ORBILOC DOG DUAL Bedienungsanleitung

GETTING STARTED

Remove the Battery Sheet (4) .
Tighten the Base (7) and you are ready to
use your Orbiloc Dog Dual .
ON / OFF / STEADY / FLASH
The Orbiloc Dog Dual is very user-friendly;
just turn the Mode Selector Ring (2) to the
left or right.
The triangle indicates the desired
function.
Flashing ( ) and Steady-on (
are found on the top of the Lens (1).
ORBILOC BUCKLE
Slide your collar, which cannot be more
than 24 mm wide and 4 mm thick, through
the two holes in the Orbiloc Buckle (5).
8
ORBILOC MOUNTS
Whether you are a professional dog handler,
or just want to ensure the visibility of your
dog with the best quality safety light, there
is a mount for you. The below mentioned
mounts will allow you to attach the Orbiloc
Dog Dual to any harness, collar or leash.
The Orbiloc Velcro Strap enables an easy
attachment to exclusive collars, leashes or
harnesses where you do not wish to leave
any mark whatsoever.
The Orbiloc Rubber Strap allows a very se-
cure attachment to most dog collars, leashes
and harnesses. The Orbiloc Rubber Strap is
resistant to extreme environments and tem-
peratures, while still maintaining its form.
The Orbiloc Clip is very convenient should
you use the Orbiloc Dog Dual on different
col lars or leashes. It enables a quick change
from one piece of equipment to another, fx.
onto a winter coat or har ness. The Orbiloc
Clip has an open end, and is therefore not
guaranteed not to fall off in rough play or
) symbols when running off leash.
The Orbiloc Quick Mount Adjustable is an
innovative way of conveniently mounting
and moving the Orbiloc Dog Dual to any
harness, collar or leash. The Orbiloc Quick
Mount Adjustable attachment can easily
be adjusted in size and prevents reshaping
of any gear.
NOTE; For specific guides on using and at-
taching the mounts please refer to
www.orbiloc.com/user-manual
NOTE; Not all mount is included with the
product. They are a separate purchase.
EN
9