Getting Started - ORBILOC DOG DUAL Bedienungsanleitung

GETTING STARTED

Remove the Battery Sheet (4) .
Tighten the Base (7) and you are ready to
use your Orbiloc Dog Dual .
ON / OFF / STEADY / FLASH
The Orbiloc Dog Dual is very user-friendly;
just turn the Mode Selector Ring (2) to the
left or right.
The triangle indicates the desired
function.
Flashing ( ) and Steady-on ( ) symbols
are found on the top of the Lens (1).
ORBILOC BUCKLE
Slide your collar, which cannot be more
than 24 mm wide and 4 mm thick, through
the two holes in the Orbiloc Buckle (5).
8