How To Adjust - Ultrasport F-bike serie Bedienungsanleitung

ASSEMBLY STEP
Step 6
•
Ensure the Computer Wire is protruding from the gap at the rear of the Main frame (1 and 2), then
connect the Upper Computer Wire. Plug the Pulse Wire into the hole at the rear of the Computer
(65).
•
To adjust the stability of the ULTRASPORTF-bike to the ground, simply turn the movable foot caps
on the feet until the desired stability is achieved.
Recheck
all bolts, nuts and pedals are
tightened securely
before use the machine

HOW TO ADJUST

The Saddle Support has "Max" Sign to show the
maximum height of Saddle. You should not exceed this
height. Unscrew the Seat Adjustment Knob a couple of
turns then pull the knob outwards to release the Seat
Support Tube . Position the Seat Support Tube to the
desired height allowing for a slight bend in the knee at
the lowest pedal position and re-tighten the Seat
Adjustment Knob .
GB
65
2
1
Sensor Plug
28
www.ultrasport.net
65
4
2
Sensor Plug