Before You Start - Ultrasport F-bike serie Bedienungsanleitung

www.ultrasport.net
GB

BEFORE YOU START

TOOLS
If required, most of our products products are supplied with basic tools, which will enable youto
successfully assemble your product. However, you may find it beneficial to have a soft-headed hammer
and perhaps an adjustable spanner handy as this may help.
PREPARE THE WORK AREA
It is important that you assemble your product in a clean, clear, uncluttered area. This will enable you to
move around the product while you are fitting components and will reduce the possibility of
injury during assembly.
WORK WITH A FRIEND
You may find it quicker, safer and easier to assemble this product with the help of a friend as some of
the components may be large, heavy or awkward to handle alone.
OPEN THE CARTON
Carefully open the carton that contains your product, taking note of the warnings printed on the
carton to ensure that the risk of injury is reduced. Be aware of sharp staples that may be used to fasten
the flaps as these may cause injury. Be sure to open the carton the right way up, as this will be the
easiest and safest way to remove all the components.
UNPACK THE COMPONENTS
Carefully unpack each component, checking against the parts list that you have all the necessary parts
to complete the assembly of your product.
Please note that some of the parts may be pre-fitted to major components, so please check carefully
before contacting our CUSTOMER SUPPORT team. In any event, please do not return the product to
your retailer before contacting us first.
20