Metz L1000 BC Kurzanleitung Seite 8

INSTALLATION OF THE BATTERY COMPARTMENT P6
1. Insert the battery compartment P6 besides the release
button of the mecalight on the right stop of the battery
compartment so that its contacts point towards the
contacts of the mecalight and press it down.
2. Press the battery compartment P6 with slight pressure
against the contacts of the mecalight till it locks appreci-
ably.
3.
For extraction of the battery compartment P6, press the
release button on the mecalight, push the battery com-
partment P6 up to the stop towards the release button
and remove the battery compartment P6.
* Battery compartment P6 pictured incl. batteries.
L1000-QG_10.indd 8
INSTALLATION OF THE DIFFUSER DISC
The diffuser disc** ensures a comfortable smooth light and can
be attached and removed easily with the mounting angle**:
1. The mounting angle is fixed between mecalight and
device holder with its knurled screw.
2. The diffuser disc is plugged in both shots of the moun-
ting angle.
** only in scope of delivery of mecalight BC X version
** available as accessory: "Metz mecabounce MBL-01"
*
English
3 – 4
01.03.2017 16:18:02