Technical Specifications - CAME MR8534 Bedienungsanleitung
Vorschau ausblenden
Andere Handbücher für MR8534:
- Handbuch (25 Seiten) ,
- Bedienungsanleitung (4 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PLEASE KEEP FOR FURTHER USE
DESIGNED FOR COLOUR PRINTING
MR8534/MR8570/MR8590
DESCRIPTION
Is a safety sensor for automatic revolving doors based on active infrared technology. It secures the area in front of the
moving door leaf. To do so, modules must be installed on the top rail of the door leaf.
1
2
3
4
5
6
TECHNICAL SPECIFICATIONS
Technology:
Emission field:
Mounting height:
Reaction time:
Max. presence time:
Supply voltage:
Max current consumption:
Output:
Max. contact voltage
Max. contact current
Max. switching power
Input:
Max. contact voltage:
Voltage threshold:
Max. number of modules:
Reflectivity:
Degree of protection:
Temperature range:
Expected lifetime:
Conformity:
MR8534-70-90/FA01345M06 - 06/2019
SAFETY SENSOR
FOR AUTOMATIC REVOLVING DOORS
User's Guide for product version 0500 and higher
See product label for serial number
1.
2.
3.
4.
5.
6.
active infrared with background suppression
400 mm (W) x 70 mm (D) (at 2 m mounting height; 4 spots active)
1.3 m to 3.5 m
64 ms (typ)
1 minute
12 V - 24 V AC +/-10% ; 12 V - 30 V DC -5%/+10%
(to be operated from SELV compatible power supplies only)
95 mA @ 24 V AC/ 70 mA @ 24 V DC; 170 mA @ 12 V AC/ 130 mA @ 12 V DC (MASTER)
85 mA @ 24 V AC/ 60 mA @ 24 V DC; 180 mA @ 12 V AC/ 113 mA @ 12 V DC (other modules)
2 relays (free of potential contact)
42 V AC/DC
1 A (resistive)
30 W (DC) / 42 VA (AC)
1 optocoupler (free of potential contact)
30 V
high: >10 V DC; low: <1 V DC
4 (up to 6 if 24 V DC)
min. 5% at IR-wavelength of 850 nm
IP54
-25 °C to +55 °C; 0-95% relative humidity, non condensing
20 years
DIN 18650-1: ch. 5.7.4; EN 16005 ch. 4.6.8;
EN 12978; IEC/EN 61508 (SIL2)
EN ISO 13849-1 Performance Level «c» CAT. 2
(under the condition that the door control system monitors the sensor at least once per door cycle)
profile
supporting clip
main connector
DIP-switch
calibration screw
receiver
7.
end cap
8.
clip with angle adjustment screw
9.
transmitter (TX)
10.
push button
11.
front face
Specifications are subject to changes without prior notice.
All values measured in specific conditions.
7
8
9
10
11
Werbung
Inhaltsverzeichnis
