Electric Information - HOLZMANN-MASCHINEN KAP 305JL Bedienungsanleitung

If not you need to adjust the whole laser assembly until laser indication matches exactly the
actual cutting line.

3.4.2 Electric information

Connect the KAP 305JL only to a power supply with fuse.
Power socket must be fused as well.
The connection of the machine to the electric power supply and the following checks are to
be carried out by respectively trained personnel.
The electronic connection of the machine is designated for operation with a grounded
power socket!
The connector plug may not be manipulated.
If the connector plug doesn't fit or if it is defect, only qualified electricians might modify or
renew it!
The grounding wire should be held in green-yellow.
A damaged cable has to be exchanged immediately!
Check, whether the feeding voltage and the Hz comply to the required values of the ma-
chine. A deviation of feeding voltage of ±5% is allowed (e.g.: a machine with working
voltage of 380V can work within a voltage bandwidth of 370 till 400V.
To determine the required diameter of the feeding cable, take the spreadsheet as a refer-
ence.
Ampere
< 5
5 to 8
8 to12
12 to15
15 to 20
20 to30
n.a. not available
HOLZMANN Maschinen Austria
Zug-, Kapp-, Gehrungssäge / Profi mitre saw / PIŁA DO CIĘCIA WZDŁUŻNEGO,POPRZECZNEGO I UKOŚNEGO
Feeding cable in meters
8 16
16 16
16 16
14 14
12 12
10 10
10 n.a.
www.holzmann-maschinen.at
A C H T U N G
24 33
16 14
14 12
12 10
10 10
10 n.a.
n.a. n.a.
INITIAL OPERATION
50 66
12 12
10 n.a.
n.a. n.a.
n.e. n.a.
n.a. n.a.
n.a. n.a.
Seite 32
KAP 305JL