Initial Operation; Assembly; Transport; Workplace Requirements - HOLZMANN-MASCHINEN KAP 305JL Bedienungsanleitung

3 INITIAL OPERATION

3.1 Assembly:

Check the machine and machine parts for hidden transport damage If you notice any
transport damage report it immediately, but latest 7 days after purchase to your dealer.
Claims of transport damage being placed after this time limit cannot be accepted anymore
by HOLZMANN Maschinen GmbH.
Check the product for completeness of delivery:
 Sliding compound saw
 Parts D-J
 manual
If not preassembled, place the back fence left/right onto ground plate of the saw.
Place the downholder (10) into the respective fitting (see Fig. A).
Mount the double bar guide (9): Pull the workpiece roller (7) and end stop (8) onto the
two bars. Then insert the whole assembly into the 2 borings on the side of the ground
plate.

3.2 Transport:

When bringing the machine to the workplace you have to prepare it for transport.
These instructions have to be followed prior to every transport of the sliding compound saw
Disconnect the machine from the power supply.
Swing the saw arm into the lowest position and lock it in that position with the interlock
knob (23).
Fix the saw arm with the sliding device fixing knob (22).
Lift the machine only at the transport handle (13).

3.3 Workplace requirements

The KAP 305JL sliding compound saw has to be attached to the underground. For this pur-
pose there are 4 borings at the ground plate, two at the front side, two at the back side.
Furthermore you can attach the machine to compound saw stands.
Operating a non attached saw poses a security risk!
HOLZMANN Maschinen Austria
Zug-, Kapp-, Gehrungssäge / Profi mitre saw / PIŁA DO CIĘCIA WZDŁUŻNEGO,POPRZECZNEGO I UKOŚNEGO
www.holzmann-maschinen.at
INITIAL OPERATION
Seite 30
KAP 305JL