Replacing Filters - Philips FC8149 Bedienungsanleitung

2
1
4222.003.3503.4.indd 15
5 To close the HEPA exhaust filter grille, first align the lugs on the top
of the grille with the slots in the appliance (1). Then press the tabs
downwards until the grille locks into place (2) ('click').
Cleaning the motor protection filter
To maintain optimal performance, clean the motor protection filter at least
once a year.
1 Lift the dust container out of the appliance by its handle.
2 Pull the filter holder with the motor protection filter out of the
appliance.
3 Take the motor protection filter out of the holder. Shake the motor
protection filter over a dustbin to clean it.
4 Put the filter in the filter holder and slide the filter holder back into
the appliance.
5 Put the dust container back into the appliance.
replacement

replacing filters

Always unplug the appliance before you replace a filter.
Replace the HEPA dust container filter and the HEPA exhaust filter every
12 months.
hEpa filters
- To remove the old filter and place the new filter, follow the instructions
for removing and placing the filters in chapter 'Cleaning and
maintenance'.
ordering filters and accessories
- HEPA exhaust filters are available under type number FC8070.
- Dust container filters (HEPA and foam) are available under type
number FC8071.
storage
1 Switch off the appliance and remove the mains plug from the wall
socket.
English
15
14-10-10 11:05