Dell PowerEdge Cluster FE100 Handbuch Seite 9

support.dell.com
Windows 2000 Advanced Server
The PowerEdge Cluster FE100/FL100 and FE200/FL200 support clustering on
Windows 2000 Advanced Server. See the following sections for information on sup-
ported configurations and service packs. See also the Dell PowerEdge Cluster
FE100/FL100 and FE200/FL200 Installation and Troubleshooting Guide for installation
instructions for hardware configurations using Windows 2000 Advanced Server.
PowerEdge Cluster FE100/FL100 and FE200/FL200
Homogeneous Configurations
Your PowerEdge Cluster FE100/FL100 and FE200/FL200 configuration supports the
following PowerEdge servers as cluster nodes in homogeneous pairs (same server)
with Windows 2000 Advanced Server:
•
PowerEdge 1550-1550
•
PowerEdge 2400-2400
•
PowerEdge 2450-2450
•
PowerEdge 2550-2550
•
PowerEdge 4300-4300
•
PowerEdge 4350-4350
•
PowerEdge 4400-4400
•
PowerEdge 6300-6300
•
PowerEdge 6350-6350
•
PowerEdge 6400-6400
•
PowerEdge 6450-6450
•
PowerEdge 8450-8450
NOTE: Heterogeneous server clusters (mixed server models) are not supported
with PowerEdge Cluster FE100/FL100 and FE200/FL200 configurations running
Windows 2000 Advanced Server.
Support for Qlogic HBAs on Windows 2000
Table 1-3 lists the QLogic HBAs and the PowerEdge servers on which they are sup-
ported for Windows 2000 cluster configurations. Table 1-4 lists the QLogic HBAs and
the PowerEdge servers on which they are supported for Windows 2000 FE200/FL200
cluster configurations. For PCI slot recommendations, see the section for your server
model on adding peripherals required for cluster nodes, found later in this document.
Dell PowerEdge Cluster Platform Guide 1-5