Afk SVT-45.3 Bedienungsanleitung Seite 12

cover plate (14).
- Insert the tube (11) into the lower tube (13). Attach the
top (8) to the tube (11) and secure using the screw (10).
Set the floor fan to the required depth and tighten the
height adjustment knob.
- Push the rear grille (5) in towards the motor and secure
using the grille holder (4).
- Push the blade (3) onto the spindle. Secure the blade with
the lock nut (2).
- Hook the front grille (1) onto the rear grille (5) and tighten
them together.
Use
- Tilt the motor housing to the required angle using the
angling button (17).
- Plug the floor fan in.
- Turn the floor fan on and off by pressing the buttons on
the fan's control panel.
- Switch the turning function on or off using the oscillation
button (7) on top of the motor housing.
TECHNICAL DATA
Voltage:
Power:
230V~50Hz
45 W