Artweger TWIN:LINE2 Bedienung + Pflege Seite 11

BATHING
WITH THE TWINLINE
1.) Move the closure unit to "shower position":
The door is not locked, and the tub drain is
open.
2.) Open the shower door to the inside by
pulling up the handle end.
3.) The shower door engages automatically
when closing and stays fixed in this position.
4.) Move the closure unit to "bath position".
Now the door is locked, and opening is no
longer possible. At the same time the drain is
closed, and you can fill the bathtub.
5.) After taking a bath set the closure unit to
"shower position" again.
Now the drain is opened again, the water
runs out and the door is unlocked.
ATTENTION: Wait with opening the door
until the water has run out completely! Do
not leave children and mentally impaired
persons without supervision!
11