Power Connection; Video Connection - Samsung SCC-C6323P Benutzerhandbuch

Installation
❖

Power Connection

• Please, check the voltage and current capacity of rated power carefully. Rated power is indicated in the back of
main unit.
Power Mode
DC 12V
AC24V
❖
RS-485 Communication
• For PTZ control, connect this line to keyboard and DVR. To control multiple cameras at the same time, RS-485
communication lines of them is connected in parallel as shown below.
❖

Video Connection

• Connect with BNC coaxial cable.
❖
Alarm Input Connection
• Sensor Input
IN1
INTERNAL IN T ER N AL
IN 2
IN COM
It is noted that short circuit between GND and
Input pin means alarm activation.
20 – 10X MINI SMART DOME CAMERA
Input Voltage Range
DC 11V ~ 15V
AC 20V ~ 29V
Keyboard Controller DVR
If you want to use Alarm Input, the types of sensor
must be selected in OSD menu. The sensor types
are Normal Open and Normal. If sensor type is
not selected properly, the alarm can be activated
reversely.
• Relay Output
There are 4 Alarm Outputs and all of them are Relay
contact type. Therefore, you do not have to care about
polarity, AC/DC, and isolations between channels. Care
must be taken for the power capacity of relay contact
written above.
Power Consumption
C6323/ C6325
8 W
10W
Normal Open Sensor output is turned ON when
(N.O) sensor is activated
Normal Close Sensor output is turned OFF when
(N.C) sensor is activated
Internal
Relay Out
Relay Out
C7325
12W
21W
Power