Installing The Battery In The Remote Control - Samsung HW-J355 Bedienungsanleitung

DESCRIPTIONS
Press the +# button to pause playing the file temporarily.
Press the +# button again to play the selected file.
If there is more than one file on the device you are playing, and you press
You can select different sound modes - STANDARD, MUSIC, VOICE,
SPORTS, CINEMA, and NIGHT MODE - depending on the type of
Press the SOUND EFFECT button on the remote control.
Select the STANDARD mode if you want to enjoy the original sound.
This will regulate and stabilize the volume level against a drastic volume
change caused by a channel change or scene transition.
Press the Bluetooth POWER button on the remote to turn the Bluetooth
Press the SOUND button on the remote to add depth and spaciousness to
Each time the button is pressed, the selection changes as follows :
OFF-SURROUND SOUND  ON-SURROUND SOUND

+ Installing the Battery in the Remote Control

1. Use a suitable coin to turn
the remote control's battery
cover counter clockwise to
remove it as shown in the
figure above.
Turns the Soundbar on and off.
Adjusts the volume level of the unit.
the [ button, the previous file is selected.
SOUND EFFECT
sources you want to enjoy.
Bluetooth POWER
POWER on function on and off.
See pages 16 and 18 for details.
Press the SOUND on the remote control.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when
inserting the battery. Put the battery
cover on and align the '●' marks side
by side as shown in the figure above.
10
POWER
VOLUME
Play/Pause
Skip Back
* Night Mode
SOUND
the sound.
3. Use a suitable coin to
turn the remote control
battery cover
clockwise as far as it
will go to fix it in place.