Samsung HT-C5800 Bedienungsanleitung Seite 38

Setup
5. In the list of networks, press the ▲▼
buttons to select a network, and then press
the ENTER button.
6. If the PIN/Security pop-up appears, go to
Step 7. If the Network Connecting Screen
appears, go to Step 11.
7. Press the ▲▼ buttons to select PIN or
Security.
For most home networks, you would select
Security (for Security Key).
8. On the Security screen, enter your network's
Pass Phrase.
✎
NOTE

You should be able to fi nd the Pass Phrase
on one of the set up screens you used to set
up your router or modem.
Network Setting
Security Key
–
A B C D
H I J K
O P Q R
V W X Y
9. To enter the Pass Phrase, follow these
general directions:
• Press the number keys on your remote to
enter numbers.
• Use the arrow keys on your remote to
move from button to button on the
Security Key screen.
• Pressing the RED (A) button on the
remote lets you change the text displayed
on the buttons to lower case, upper case,
numbers, or icons. To enter a letter or
symbol, move the cursor to the letter or
symbol, and then press the ENTER
button.
• To delete the last letter or number you
entered, press the GREEN (B) button.
38
English
0 entered
0~9 Number
E F G
a
Lower case
L M N
b Delete
S T U
space
Z
Move " Enter ' Return
10. When done, press the BLUE (D) button on
your remote, and then press the ENTER
button.
11. Wait until the connection confi rmation
message is displayed, and then press the
ENTER button. The Network Settings
screen reappears.
12. To test the connection, press the ▼ button
to select Network Test, and then press the
ENTER button.
Setting Up the Wireless Network
Connection - Manual
If the Auto Setting does not work, you need to
enter the Network settng values manually.
To get the Network setting values from most
Windows computers, follow these steps:
1. Right click the Network icon on the bottom
right of the screen.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the
Support tab.
4. On the Support tab, click the Details button.
The Network settings are displayed.
To Enter the Network settings into your product,
follow these steps:
1. On the Internet Protocol Setup screen,
press the ENTER button.
2. Press the ▲▼ buttons to select Manual,
and then press the ENTER button.
3. Press the ▼ button to go to the fi rst entry
fi eld (IP Address).
Network Setting
Select a network
Internet Protocol Setup
IP Address
Subnet Mask
Gateway
DNS
DNS Server
a PBC(WPS) > Move
4. Use the number buttons to enter numbers.
: Not Selected
\
: Manual
: 0 0 0 0
: 255 255 255 0
: 0 0 0 0
: Manual
: 0 0 0 0
" Enter ' Return