Edge Cleaning - Samsung SR8824 Benutzerhandbuch

Operating the cleaner
USING THE ROBOTIC VACUUM CLEANER

EDGE CLEANING

When the Obstacle Sensor detects an obstacle during
the cleaning, the Robotic vacuum Cleaner reduces its
speed to minimize the bumping impact and the Bumper
Sensor also helps it lower the bumping impact.
It cleans the corners by reaching to them as close as
possible. (This Robotic vacuum Cleaner is a touching
type cleaner.)
The robotic vacuum cleaner will move by itself and
automatically clean the house until cleaning is completed once.
If cleaning begins when the robotic vacuum cleaner is docked
■
with the charger station, the time to return to the charger is
decreased since the robotic vacuum cleaner remembers its
original position while moving.
If the battery level becomes too low while cleaning, the robotic
■
vacuum cleaner will automatically return to the charger station
and resume cleaning after charging its battery. (Number of
cleaning operations resumed: Once)
Main unit button
4time
About the Resume Cleaning function
• If the robotic vacuum cleaner has evaluated
NOTE
that cleaning is complete, the resume cleaning
function is not performed.
• If you move the robotic vacuum cleaner when it
is being charged or press a button, the robotic
vacuum cleaner judges cleaning to be complete
and does not resume cleaning.
Do not move the robotic vacuum cleaner when it is cleaning or press a button
while it is cleaning. Otherwise, the robotic vacuum cleaner judges cleaning to be
CAUTION
complete and starts cleaning again from the beginning.
28_ Operating the cleaner
Configuration Sequence
1
Set the mode.
▶
2
Cancel the mode.
While cleaning
When cleaning is
complete